DynaColor QIG-510 Series Guide d'installation télécharger pdf (Page 43)

Installation Guide

4.4.4 Wall Box Mounting

Package Contents:

• M8x16 Screw x4

• Washer-8 x4

• Spring Washer-8 x4

Items Needed:

• Dome Camera

• Data Cable (supplied)

• Ethernet Cable (network Dome Camera)

• Standard/ Compact Pendent Mount and equipped items (optional

accessory)

• Wall Box Mounting (optional accessory)

• Indoor Mount Kit (optional accessory)

• Waterproof Rubber (Indoor Mount Kit’s accessory)

• Screws and Screw Anchors for fixing the Wall Box Mounting onto the

ceiling (not supplied)

Tools Needed:

• Tool for drilling

• Tool for screwing

Follow the steps to mount the Dome Camera with the Standard/ Compact

Pendent Mount and Wall Box Mounting.

1) Make a cable entry hole on the wall to recess the cable(s).

2) Fix the Wall Box Mounting on the wall with proper screws and screw

anchors. Then run the cable(s) through the hole on the Wall Box Mounting

with the Data Cable’s 22-pin cable coming out.

3) Fasten the Standard/ Compact Pendent Mount onto the Wall Box

Mounting with the supplied screws and washers. Then thread the cable(s)

through the Standard/ Compact Pendent Mount with the cable(s) coming

out of the Pendent Mount’s outlet.

NOTE: Please block the cable entry hole with the supplied sponge

to avoid insects entering the Pendent Mount. See the illustrations

in section 4.4.2 Compact Pendent Mount > Step 4.

4) Attach the Waterproof Rubber to the Standard/ Compact Pendent Mount.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 58 59

Pas de commentaire

DynaColor QIG-510 Series Guide d'installation Page 43