DynaColor QIG-510 Series Guide d'installation télécharger pdf (Page 4)

Installation Guide

Warnings and Cautions

• Handle the camera carefully

Do not abuse the camera. Avoid striking, shaking, etc. The camera could

be damaged by improper handing or storage.

• Installing electricity wiring carefully

Ask qualified personnel of electrical wiring for the installation. Please note

that input electricity to the unit is at tolerance of DC 12V/AC 24V ± 10%.

The camera is capable of surge protection; ensure AC power model unit

grounded appropriately against damage of heavy current or electric

shock.

• Do not disassemble the camera

To prevent electric shock, do not remove screws or covers. There are no

user serviceable parts inside. Ask a qualified service person for servicing.

• Do not block cooling holes on the bracket

This camera has a cooling fan inside. Blocking the cooling holes leads to

build up of heat the camera and may cause malfunction.

• Do not operate the camera beyond the specified temperature,

humidity or power source ratings

Use the indoor dome camera under conditions where temperature is

between 0°C ~ 40°C (32°F ~ 104°F) and the outdoor camera under

conditions where temperature is between -30°C~45°C (-22°F~104°F), and

humidity is below 90%.

• Do not expose the indoor dome camera to rain or moisture, or try to

operated it in wet areas

The indoor dome camera is designed for indoor use or locations where it

is protected from rain and moisture. Turn the power off immediately if the

camera is wet and ask a qualified service person for servicing. Moisture

can damage the camera and also create the danger of electric shock.

• Do not use strong or abrasive detergents when cleaning the camera

body

Use a dry cloth to clean the camera when dirty. In case the dirt is hard to

remove, use a mild detergent and wipe gently.

1 2 3 4 5 6 7 8 9 ... 58 59

Pas de commentaire

DynaColor QIG-510 Series Guide d'installation Page 4