DynaColor QIG-510 Series Guide d'installation Page 2

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 21
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 1
- 2 -
Overview
The VPort 364A is a 4-channel industrial video encoder that supports the
H.264 video compression algorithm, which provides the best video quality
on the market while requiring less bandwidth compared to other video
compression standards. In addition, the VPort 364A supports
simultaneous dual video streams with different formats: H.264 and
MJPEG. The two video streams can be used for different purposes, such as
viewing, recording, or analysis. In addition, the rugged industrial design
with -40 to 75°C operating temperature, built-in fiber Ethernet ports,
IP30-rated form factor, and industrial certifications, make the VPort 364A
highly suitable for use in harsh environments.
Package Checklist
The VPort 364A ships with the following items:
VPort 364A.
Two 5-pin terminal blocks for 2 power inputs and 2 relay outputs.
8-pin terminal block for 4 DIs (Digital Inputs).
5-pin terminal block for the RS-232/422/RS-485 PTZ control port.
Quick installation guide.
Documentation & Software CD
Warranty Card.
Note: If any of these items are missing or damaged, please contact your
customer service representative for assistance.
NOTE
This product must be installed in compliance with your local laws
and regulations.
Features
High Performance Audio-Video Networking Solution
Compatible with NTSC/PAL analog video cameras
H.264 and MJPEG video compression standards
Dual simultaneous video streams (1 H.264 and 1 MJPEG)
Lower latency, under 200 ms
4 BNC video inputs
Single video stream up to 30 frames/sec in Full D1 (720 x 480)
resolution in NTSC, and 25 frames/ sec in Full D1 (720 x 576)
resolution in PAL
Select between Full D1/ 4CIF/ VGA/ CIF/ QCIF resolutions
1 audio input and 1 audio output for 2-way voice communication
TCP, UDP, and HTTP network transmission modes
Modbus/TCP for easy communication with SCADA systems
Standard RTSP (Real-time streaming protocol) for easy integration
DynaStream™ for automatic frame rate adjustment to control IP
video traffic
Multicast (IGMP) protocols for efficient network transmission
QoS (TOS) for priority transmission
SNMP V1/V2c/V3 for network management
Built-in web server and RS-232 console for remote access and
configuration
Vue de la page 1
1 2 3 4 5 6 7 ... 20 21

Commentaires sur ces manuels

Pas de commentaire