DynaColor QIG-510 Series Guide d'installation télécharger pdf (Page 12)

- 12 -

DIN-Rail Mounting

The aluminum DIN-Rail attachment plate should already be attached to

the back panel of the VPort 364A when you take it out of the box. If you

need to reattach the DIN-Rail attachment plate to the VPort 364A, make

sure the stiff metal spring is situated towards the top, as shown in the

figures below.

STEP 1: Insert the top of the

DIN

-Rail into the slot just below

the stiff metal spring.

STEP 2: The DIN-Rail attachment

unit will snap into place as shown

below.

To remove the VPort 364A from the DIN-Rail, simply reverse Steps 1 and

2 above.

Wall Mounting (optional)

For some applications, you will find it convenient to mount the VPort 364A

on a wall, as illustrated below.

STEP 1:

Remove the aluminum DIN-Rail attachment plate from VPort 364A, and

then attach the wall mount plates, as shown in the diagrams below.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 20 21

Pas de commentaire

DynaColor QIG-510 Series Guide d'installation Page 12