DynaColor S6 Manuel d'utilisateur

00-3H8110ZSEA4 Integrated High Speed Dome Camera Outdoor Dome (811) User’s Manual

User’s Manual 92.2 Switch Definition First of all, configuring the dome ID and communication protocol is required before

User’s Manual 10 same. The RS-485 default setting is half-duplex (see the diagram as follows). Please do not change the default

User’s Manual 11 Switch No. Protocol Baud Rate 00 VCL 9600 01 Pelco D 2400 02 Pelco P 4800 04 Chiper 9600 05 Philips

User’s Manual 12 The 22-pin connector definition is listed as below. No. Pin Cable 1 AC24-1 20AWG 2 Alarm Pin (Not wired)

User’s Manual 13 Pin Definition 2 ALM NC 4 ALM NO 6 ALM COM 11 ISOG 12 ALM-1 13 ALM-3 14 ALM-2 15 ALM-4 16 ALM-5 17 A

User’s Manual 14 3. Operation and Configuration 3.1 OSD Display Format The information shown on the screen are described in te

User’s Manual 153.2 OSD Menu Tree The OSD setup menu structure of E/F/U and R/K model are listed seperately in the follo

User’s Manual 16 Item Layer 1 Layer 2 Layer 3 DefaultPRESET ☆ SEQUENCE AUTOPAN SELECT MODE CRUISE PRESET POINT SEQUENCE L

User’s Manual 17Item Layer 1 Layer 2 Layer 3 DefaultAUTOPAN CRUISE IR FUNC. NO FUNCTION PRESET POINT SEQUENCE L

User’s Manual 18 Item Layer 1 Layer 2 Layer 3 Default PRESET ☆ SEQUENCE AUTOPAN ALARM ACTION CRUISE PRESET POINT SEQUENCE

User’s Manual 1Preface The information given in this manual was current when published. The company reserves the right t

User’s Manual 19Item Layer 1 Layer 2 Layer 3 Default MASK DSIPLAY <FIRST>, <LAST> First EXIT YES TI

User’s Manual 20 3.3 Configuration Menu The detailed functions and parameter settings of your high speed dome can be set by the

User’s Manual 213.3.2 BACKLIGHT The Backlight compensation function prevents the center object from being too dark in su

User’s Manual 22 • MANUAL In this focus mode, users can adjust the lens focus manually by pressing the Focus Near/Far button on

User’s Manual 233.3.5 AE MODE The exposure is the amount of light received by the image sensor and is determined by how

User’s Manual 24 R/K Model: • AUTO In this mode, the camera’s Shutter, IRIS and AGC control function work automatically to comp

User’s Manual 25computes the white balance value output using color information from the entire screen. It outputs the p

User’s Manual 26 • OFF Hide the ID address of the selected dome. 3.3.8 SETUP MENU Users can adjust camera lens model paramete

User’s Manual 27M.E. The item is a standard mechanical operation. As the dome tilts 90°, it will pan 180°, then continui

User’s Manual 28 E/F/U Model: For these models, maximum 12× digital zoom function is allowed to be enabled. The default setting

User’s Manual 2 Cautions • Handle the camera carefully Do not abuse the camera. Avoid striking, shaking, etc. The camera could

User’s Manual 29 3.3.9 SETUP MENU2 (E/F/U Model Only) The Aperture and Mask Display settings can be configured under SE

User’s Manual 30 even titles are set in advance. 3.3.11 TITLE SETTING Up to 16 zone titles can be set with maximum 20 character

User’s Manual 31 • ALARM PIN The dome provides 8 alarm inputs and 1 output (1× N.O. and 1× N.C.). Select an alarm conn

User’s Manual 32 SEQUENCE Select a sequence line that the dome camera should execute when alarm pin is triggered. The Sequence

User’s Manual 33 • SELECT MODE Select one of the modes that the dome should execute when HOME function is enabled and t

User’s Manual 34 • SEQUENCE LINE There are eight sets of sequence lines built in the dome camera. Using LEFT/RIGHT direction

User’s Manual 35• DWELL TIME The DWELL TIME is the duration time that the dome will stay at the sequence point, and the

User’s Manual 36 • END POINT Users are able to set the end point after the start point is defined. Pan the dome to another posi

User’s Manual 37 • RECORD START Follow the description to record the CRUISE path. 1. Rotate the dome camera to a de

User’s Manual 38 • ON Select the item to remove the IR cut filter. K Model: • AUTO The Internal circuit will automatically

User’s Manual 3Content 1. Overview ...

User’s Manual 39INT. FOCUS The alarm will be triggered if the internal focus changes; and if the focus returns to the or

User’s Manual 40 • WDR FUNCTION This item is used to define the WDR function mode. AUTO If select <AUTO>, the dome camer

User’s Manual 41• COLOR The color of privacy mask can be set through this item. The available colors are black, heavy g

User’s Manual 42 • SHADE The color of privacy mask can be selected through this item. The available colors are black, gray and

User’s Manual 43LAST If select this mode, the camera will move the dome to the preset point, then display the mask zone.

User’s Manual 44 • SCHEDULE SWITCH Select <ON> to enable the Schedule function or <OFF> to disable. • SCHEDULE

User’s Manual 45Appendix A: Technical Specification Items R Model E Model F Model K Model U Model CAMERA NTSC 38

User’s Manual 46 OSD Menu Notes The following OSD menu tables are provided for users to record the dome settings. <E/F/U M

User’s Manual 47Item Layer 1 Layer 2 Layer 3 Note PRESET POS. <001> ~ <256> SPEED <01> ~ <1

User’s Manual 48 <R/K Model> Item Layer 1 Layer 2 Layer 3 Note DEFAULT CAMERA <ON>, <OFF> ON BLC Le

User’s Manual 4 3.3.10 TITLE DISPLAY...

User’s Manual 49Item Layer 1 Layer 2 Layer 3 Note START POINT <TO FIND>, <TO SAVE> END POINT <TO

User’s Manual 51. Overview ZH811 is a new weather resistant integrated high speed dome camera designed to apply to bot

User’s Manual 6 Large set of built-in protocols provide connectivity to other surveillance systems. The built-in protocols incl

User’s Manual 7Privacy Mask for Privacy Protection • Up to 24 privacy zones of camera view programmable Dynamic Dome

User’s Manual 8 2. Connecting the High Speed Dome Please refer to the following sections to connect, set and operate the dome c