DynaColor Lite H.264 DVR Manuel d'utilisateur télécharger pdf (Page 25)

DVR User’s Manual

3.5.6 ezRecord Setup

This item aims to ease the complicated record settings, and to make the

setup much easier. Note that the item can be reached only when <ezRecord>

is selected as the option for <Preset Config>.

Select <ezRecord Setup> from <Record Setup> and press ENTER, the

sub-menu appears as below figure:

ezRecord Setup

How Many Days To Record

Daytime Record

Night Record

Weekend Record

Average Normal PPS

Average Normal Quality

7 Days

Yes

Best

Follow these steps to Setup ezRecord:

• Select <How Many Days To Record> and press ENTER, then press

UP/DOWN to choose an option. The average normal PPS & Quality will

be adjusted automatically. The maximum of days depends of the size of

the installed HDD. In other words, the larger the size of the HDD installed,

the more days the unit can record.

• Move to <Daytime Record> and press ENTER. This item will determine

whether the DVR will record during daytime. If yes, use UP/DOWN to

select <Yes> as to enable daytime recording; or select <No> to disable.

• Repeat the same procedures through the 3rd and 4th item, respectively.

Note that <Weekend Record> will be inaccessible if <Weekend

Schedule> in <Schedule Setup> is set to <No>.

• Select <Average Normal PPS> and press ENTER, then press UP/DOWN

to make a choice. The <How Many Days To Record> will be computed

automatically.

• Select <Average Normal Quality> and press ENTER, then press

UP/DOWN to make a choice. The <How Many Days To Record> will be

computed automatically.

NOTE: The current number of connected cameras will affect the

recording quality automatically calculated through the <ezRecord

Setup>. Therefore, once the number of connected cameras is

changed, the <ezRecord Setup> should be reset.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 68 69

Pas de commentaire

DynaColor Lite H.264 DVR Manuel d'utilisateur Page 25